NeoECG, Lepu medical'ın en yeni tablet akıllı ekg makinesidir. Bu ekg makinesi, bir baskı yuvası ve taşınabilir bir Bluetooth yazıcı ile 7 inç versiyonu S120 ile 10.1 inçlik bir T180 sürümüne ayrılmıştır. Her iki makine de Android işletim sistemini benimsemekte ve aynı zamanda yüksek çözünürlüklü kapasitif dokunmatik ekranlarla donatılmıştır. Ailelerin, kliniklerin, tıbbi kurumların, hastanelerin ve diğer senaryoların ihtiyaçlarını tamamen karşılayan hafif ve taşınabilir.
High Accuracy Rate: Tested by 50,000,000 training data and 1,000,000 independent measured data, the average accuracy rate of the AI-ECG platform reach 95.2%.
High Analysis Speed: Just take 1s for automatically resting ECG analysis. The time saved can reduce the overall time of clinical ECG analysis.
Comprehensive Diagnosis: Support 16 types of cardiac classification, and 104 types of ECG diagnostic classifications.
10.1'' high-resolution color touch screen, easy to operate. Portable design, compact in size.
Support simultaneous acquisition and display of 18-channel waveforms, as well as cardiac/heart rate detection.
Support wireless transmission of ECG data via WiFi and mobile network.
Can be powered by an external DC power supply, and a built-in rechargeable lithium battery.
Support auto, RR analysis, HRV, medicine test, and ECG event mode.
Provide 4 sampling modes: pre-sampling, real-time sampling, periodic sampling, and trigger sampling.
Input patient information via a virtual alphanumeric keyboard and barcode scanning.
Freeze the ECG waveform on the screen.
Model | T180 | |
Structure | Host | Base |
Size | 272.6mm x181.2mm x 25.8mm (Length x Width x Height) | 274mm x 288 mm x 111.2 mm (Length x Width x Height) |
Weight | 1.2 Kg (including main unit, battery, without accessories) | About 2.5 kg (including battery) |
Built-in rechargeable lithium ion battery | Rated voltage: 7.4V | Rated voltage: 14.4V |
Rated capacity: 5000 mAh | Rated capacity: 4400 mAh | |
Power supply time: When only the internal battery is used, the standby time is more than 72 hours, and the continuous working time is more than 12 | ||
hours under normal circumstances after the battery is fully charged. (collected every 5 minutes) | ||
Charging time: Charge at least 5 hours before using the battery for the first time; when the battery is turned off and charged, the exhausted battery will be charged to 90% in less than 4 hours and fully charged in less than 5 hours. | ||
Screen | 10.1-inch, color LCD touch screen resolution: 1280 × 800 pixels | |
AC power | Rated voltage: 100 - 240 v~ | |
Rated frequency: 50/60Hz | ||
Type | Thermal recorder | |
Recording paper | Reel thermal recording paper, paper width: 216 mm | |
Paper driving rate | 5 mm/s, 6.25 mm/s, 10 mm/s, 12.5 mm/s, 25 mm/s, and 50 mm/s. The error is not greater than ±3% | |
Number of waveforms | Record up to 18 waveforms at the same time | |
Print resolution | Vertical resolution: 8 dots/mm Horizontal resolution: 40 dots/mm (Paper driving rate 25 mm/s) | |
Calculation method | Peak value detection | |
Measuring range | 30 bpm - 300 bpm | |
Measurement accuracy | ±1 bpm or ±1%, whichever is the largest | |
Lead | 9-lead, 12-lead, 15-lead or 18-lead simultaneous acquisition and analysis | |
A/D conversion | 24-bit | |
Sampling rate | 32000 dots/s | |
Common mode rejection ratio (CMRR) | ≥140 dB (Power frequency notch is turned on) ≥120 dB (Powerfrequency notch is turned off) | |
Time constant | ≥5s | |
Frequency response | Based on 10 Hz, (0.01Hz- 350Hz)+0.4dB-3.0 dB | |
Sensitivity | Auto, 2.5 mm/mv, 5 mm/mv, 10 mm/mv, 20 mm/mv, and 40 mm/mV. The error is not more than ±5% | |
Filter | AC filter: 50 Hz, 60 Hz, and off | |
EMGfilter: 25 Hz, 35Hz, 45 Hz, and off | ||
Baseline drift filter: 0.01 Hz, 0.05 Hz, 0.32 Hz, and 0.67Hz | ||
Low pass filter: 75 Hz, 100 Hz, 150 Hz, 300 Hz, and off | ||
Time base | 5 mm/s, 6.25 mm/s, 10 mm/s, 12.5 mm/s, 25 mm/s and 50 mm/s. | |
Selection and accuracy | The allowable time measurement error within the range of 0.2s- 2.0s does not exceed ±3%. | |
Input impedance | ≥100 MΩ (10 Hz) | |
Input loop current | ≤10 nA | |
Calibration voltage | lmV±2% | |
Polarization voltage | ±900 mV, the waveform amplitude change is ±5% | |
System noise | ≤12.5 µV | |
Amplitude quantification | 0.95 µV/LSB | |
Electrode polarization recovery time | <10 s | |
Pace pulse display | Display ECG signal for pacing pulses with an amplitude of±2 mV-±700 mv, a duration of 0.1 ms- 2.0 ms, a rise time of less than 100 µs, and a frequency of 100/min. | |
Minimum detection | 20 µVp-p |
Lepu'ya gösterdiğiniz ilgi için teşekkür ederiz
İlgili Lepu-yaratıcı Akıllı ekg makineleri